Autotrol Corporation - Engineered Solutions for Your Motion Needs
Some of our motors: Permanent Magnet Synchronous AC Gear Motors, Hysteresis Synchronous AC Gear Motors, DC Gear Motors, Stepper Motors
 

560 Geared Motor

Versatile instrument grade stepper motor offers extemely high torque in an unusually small profile. Available with hobbed steel gears or direct drive. Gear ratios available 3.6:1 to 720:1. Also available without gearhead as direct drive motor...consult factory.

Features:
Unipolar or bipolar operation • 0-300 pulses per second, 18,000 18° steps per minute • Gear train in rugged die cast housing handles high torque loads to 200 oz. inches • Options available...consult factory

Specifications

Motor Performance

Static Gear Train Rating
200 oz.-in. (14,400 gm.-cm.) maximum.
Varies with gear train construction.

Electrical
Voltage: 5V and 12V standard (other voltages available)
Power Input: 5 watts nominal

Leads
9 ± 1/2 in. (22.9 ± 1.27 cm)
26 AWG 7 x 34, stranded
PVC insulation 1/64 in. (0.4 cm.) thick

Output Shaft Options Available

Exits at 12, 4, or 8 o'clock

Ambient Operating Temperature Range
Varies with step rate...consult factory

Lubrication
Permanently lubricated. Special lubricants available for operation under 32°F (0°C)...consult factory

Wiring Diagram / Stepping Sequence
 
© 1997 - 2008 Autotrol Corporation. All Rights Reserved.                                  Website Designed & Hosted by Excalibur Technology Corp.