Autotrol Corporation - M150 Specifications

Autotrol Corporation - Engineered Solutions for Your Motion Needs

150 Motor

Permanent magnet synchronous motor used in applications requiring up to 125 ounce-inches (9,000 gm.-cm.) of dynamic torque. Cut metal or molded plastic gear trains, different output shafts and clutches offer flexibility to meet a variety of application requirements. Our most popular low cost gearmotor for timing and drive source applications. Speeds available down to 1 revolution per day. Motor head also available with round gearbox as Model 125.

Features:
Gear housing available in die cast metal or molded plastic • Output shaft may extend from front, rear, or both ends • Mounting is compatible with other pear-shaped motors • Impedance protected • UL, CSA & VDE recognized • Class F insulation system is standard • Options available…consult factory

Specifications

Rated Torque
Running: 125 oz.-in. (9,000 gm.-cm.)at 1 RPM
Starting: 87 oz.-in. (6,264 gm.-cm.) at 1 RPM

Rotor Speed
400 RPM at 60 Hz

Static Gear Train Rating
200 oz.-in. (14,400 gm.-cm.) maximum.
Varies with gear train construction.

Rotation
CW, CCW, or Bi-Directional

Electrical
Voltage: 24V, 115V, or 230V
Frequency: 60Hz, 50Hz, or 50/60Hz
Power Input: 3 watts maximum
Current Input: 24V-130ma, 115V-45ma, 230V-20ma at 60Hz or 50Hz

Electrial Terminiations Standard motor is provided with either poke-in or quick-connect terminals. Leads, cord sets and connectors available as options.

Terminiation Points
at 1, 5, or 9 o'clock
for metal gear housing.

Ambient Operating Temperature Range
32°F to 230°F (0° to 110° C) for class F insulation system, which is standard.

Lubrication
Permanently lubricated. Special lubricants available for operating under 32°F (0°C)...consult factory

Output Shaft and Clutch Options Available